Eco-friendly management of harmful cyanobacterial blooms in eutrophic lakes through vertical flow multi-soil-layering technology.

Eutrophication has led to the widespread occurrence of cyanobacterial blooms. Toxic cyanobacterial blooms with high concentrations of microcystins (MCs) have been identified in the Lalla Takerkoust reservoir in Morocco. The objective of this study was to evaluate the efficiency of the Multi-Soil-Layering (MSL) ecotechnology in removing natural cyanobacterial blooms from the lake. Two MSL pilots were used in rectangular glass tanks (60 × 10 × 70 cm). They consisted of permeable layers (PLs) made of pozzolan and a soil mixture layer (SML) containing local soil, ferrous metal, charcoal and sawdust. The main difference between the two systems was the type of local soil used: sandy soil for MSL1 and clayey soil for MSL2. Both MSL pilots effectively reduced cyanobacterial cell concentrations in the treated water to very low levels (0.09 and 0.001 cells/mL). MSL1 showed a gradual improvement in MC removal from 52 % to 99 %, while MSL2 started higher at 90 % but dropped to 54% before reaching 86%. Both MSL systems significantly reduced organic matter levels (97.2 % for MSL1 and 95.8 % for MSL2). Both MSLs were shown to be effective in removing cyanobacteria, MCs, and organic matter with comparable performance.

Unlocking the potential of bacterioplankton-mediated microcystin degradation and removal: A bibliometric analysis of sustainable water treatment strategies.

Microcystins (MCs) constitute a significant threat to human and environmental health, urging the development of effective removal methods for these toxins. In this review, we explore the potential of MC-degrading bacteria as a solution for the removal of MCs from water. The review insights into the mechanisms of action employed by these bacteria, elucidating their ability to degrade and thus remove MCs. After, the review points out the influence of the structural conformation of MCs on their removal, particularly their stability at different water depths within different water bodies. Then, we review the crucial role played by the production of MCs in ensuring the survival and safeguarding of the enzymatic activities of Microcystis cells. This justifies the need for developing effective and sustainable methods for removing MCs from aquatic ecosystems, given their critical ecological function and potential toxicity to humans and animals. Thereafter, challenges and limitations associated with using MC-degrading bacteria in water treatment are discussed, emphasizing the need for further research to optimize the selection of bacterial strains used for MCs biodegradation. The interaction of MCs-degrading bacteria with sediment particles is also crucial for their toxin removal potential and its efficiency. By presenting critical information, this review is a valuable resource for researchers, policymakers, and stakeholders involved in developing sustainable and practical approaches to remove MCs. Our review highlights the potential of various applications of MC-degrading bacteria, including multi-soil-layering (MSL) technologies. It emphasizes the need for ongoing research to optimize the utilization of MC-degrading bacteria in water treatment, ultimately ensuring the safety and quality of water sources. Moreover, this review highlights the value of bibliometric analyses in revealing research gaps and trends, providing detailed insights for further investigations. Specifically, we discuss the importance of employing advanced genomics, especially combining various OMICS approaches to identify and optimize the potential of MCs-degrading bacteria.

Typology and classification of water quality in an intermittent river in a semi-arid Mediterranean climate.

The typology and classification of rivers are highly relevant concepts in the field of limnology and freshwater ecology. Water body typology systematically categorizes water bodies based on their natural attributes, while water body classification groups them based on specific criteria or purposes for management, regulatory, or administrative reasons. Both concepts play important roles in understanding and managing water resources effectively. This scientific article focuses on the ZAT River in Morocco as a model for studying low-flow and intermittent rivers. The objective is to develop an accurate model for the typology and classification of small, low-flow rivers into homogeneous classes based on natural and anthropogenic factors. The study also investigates the impact of human activities on altering the uniformity and reference nature of the water body. The typology of water bodies is carried out according to the European methodology specified in The European Commission's Water Framework Directive (WFD) in 2000. The classification of water bodies is conducted by assessing their chemical and biological quality using the weighted index (WI), the Iberian Biological Monitoring Working Group (IBMWP) index, and multivariate statistical methods such as principal component analysis (PCA) for confirming water quality assessment. The results indicate the possibility of dividing the basin into four water bodies. Water bodies show homogeneity in terms of chemical quality when human influence is minimal or during periods of high river flow. However, increased human influence and decreased river flows lead to heterogeneity in chemical quality, indicating an unstable state. This study is the first of its kind in arid and semi-arid intermittent rivers, where such an approach could be suggested to determine their typology and classification.

Soil fertility and agro-physiological responses of maize (Zea mays) irrigated by treated domestic wastewater by hybrid multi-soil-layering technology.

The depletion of water resources has gained global attention, particularly in arid climates, where there is growing interest in reusing treated wastewater for irrigation. This study focuses on the impact of irrigating treated wastewater using a hybrid multi-soil-layering (MSL) technology on soil physicochemical properties and the agro-physiological characteristics of maize (Zea mays) cultivated in Morocco, a region characterized by arid conditions. To achieve this research goals, three plots were cultivated with Zea mays and subjected to irrigation with water of varying qualities: raw wastewater (RWW), treated wastewater (TWW), and well water (WW). This experiment ran for five months, covering one crop season. The physicochemical and microbiological parameters in the soil and water were investigated, and the agro-physiological characteristics of the maize crops were assessed. The findings revealed significant differences in physicochemical and microbial parameters within both water and soil, as well as in the physiological responses of the maize crop, among the three water treatments. TWW's quality met the permissible limits for direct wastewater discharge, as prescribed by Moroccan norms, making it suitable for potential irrigation reuse. Moreover, the higher content of key elements (Na, K, Ca, and Mg) in WW indicated that TWW was more suitable for irrigation. Zea mays irrigated with RWW and TWW exhibited a higher accumulation of protein and sugar content compared to WW irrigation. Furthermore, the biomass parameters, including root, aerial, and grain dry weight, showed a positive effect on Zea mays irrigated with RWW and TWW compared to WW. Total chlorophyll content, on the other hand, was highest in plants irrigated with WW, followed by TWW. Plants irrigated with RWW produced the highest amounts of nitrogen, phosphorus, and potassium. Conversely, plants irrigated with WW had a higher content of Ca, Na, and Mg. TWW yielded medium concentrations of N, P, K, Ca, Mg, and Na compared to RWW and WW, attributed to the nutrients provided by irrigation with TWW using the hybrid MSL technology. In conclusion, aside from their use as irrigation water, treated wastewater emerges as a valuable source of plant nutrients and soil fertilizers. They offer significant nutritive value, enhancing plant growth, reducing the need for additional fertilizer application, lowering mineral fertilization costs, and increasing the productivity of infertile soils. This highlights the potential of treated wastewater to improve agricultural sustainability in arid regions like Morocco.

Continuous treatment of highly concentrated tannery wastewater using novel porous composite beads: Central composite design optimization study.

This present study depicts the successful employment of fixed-bed column for total chromium removal from tannery wastewater in dynamic mode using sodium alginate-powdered marble beads (SA-Marble) as adsorbent. The SA-Marble composite beads prepared were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and Brunauer, Emmett and Teller (BET) method. The adsorption process performance of this bio-sorbent was examined in batches and columns for real effluent (tannery wastewater). After 90 min, the total chromium removal efficiency could be kept above 90% in the batch experiment. The adsorption kinetics fit better with the pseudo-second-order model, indicating the chemisorption process and the adsorption capacity of about 67.74 mg g-1 at 293 K (C0 = 7100 mg L-1) was obtained. Additionally, dynamic experiments indicate that the total chromium removal efficiency could be maintained above 90% after 120 min at 293 K and 60 min at 318 and 333 K; it's an endothermic but rapid process. The effects of two adsorption variables (Temperature and time) were investigated using central composite design (CCD), which is a subset of response surface methodology (total Cr, COD, sulfate, and total phosphorus percentage removal). This work paves a new avenue for synthesizing SA-Marble composite beads and provides an adsorption efficiency of total chromium removal from tannery wastewater.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials.

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Assessing the performance of a waste management system towards a circular economy in the Global South: The case of Marrakech (Morocco).

Waste management is essential for the safety and wellbeing of any society; it also helps to tackle global problems, such as climate change and resource scarcity. To support the evolution of waste management systems (WMSs) towards a circular economy (CE), assessment methods are applied. This paper shows, using the case of Marrakech (Morocco), how a novel holistic approach called WMS development stage concept (WMS-DSC) is applied to assess WMSs and determine measures promoting a CE. The approach enables a simplified derivation of measures that are useful to municipal decision makers and consists of five stages; stage 1 is equal to a WMS lacking essential WM elements and stage 5 describes a functioning CE. The approach was specifically designed to be transferable to other Global South cities through the categorization into these universal stages. The results from the WMS-DSC show that components related to energy recovery and waste recycling are classified in stage 1. For the latter, a slight development towards stage 2 can be assumed due to the planned activities in Marrakech. The components "collection and transport" and "prevention and reuse" are mainly in stage 2. Nevertheless, the components "governance", "sector and market" and "waste disposal" are assigned to stages 2 and 3 with a stronger trend towards stage 4. The results show that in Marrakech and Morocco, CE is still in its infancy, and with this current state, it is hard to achieve. However, 33 measures were determined to improve the WMS of Marrakech and promote a CE.

Phenolic compounds removal in table olive processing wastewater by column adsorption: conditions' optimization.

The annual production of wastewater from the olive table industry poses a serious problem owing to its high organic matter load, which is highly concentrated in phenolic compounds (PCs) and inorganic materials. This research used adsorption to recover PCs from table olive wastewater (TOWW). Activated carbon was employed as a novel adsorbent. The activated carbon was obtained from olive pomace (OP) and activated using a chemical agent (ZnCl2). Fourier transform infrared spectroscopy analysis (FTIR), Brunauer-Emmett-Teller analysis (BET), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were applied to characterize the activated carbon sample. To optimize the biosorption conditions of PCs (adsorbent dose (A), temperature (B), and time (C)), a central composite design (CCD) model was used. An adsorption capacity was 1952.34 mg g-1 for optimal conditions with an activated carbon dose of 0.569 g L-1, a temperature of 39 °C, and a contact time of 239 min. The pseudo-second-order and Langmuir models as kinetic and isothermal mathematical models were proved to be more appropriate for the interpretation of the adsorption phenomenon of PCs. PC recovery was performed in fixed-bed reactors. The results of the adsorption of PCs from TOWW by activated carbon could be an effective process at a low cost.

Investigation of the agroecological applications of olive mill wastewater fractions from the ultrafiltration-nanofiltration process.

Agricultural applications of olive mill wastewater (OMW) represent a critical challenge, consistent with waste recycling and the trend towards a more sustainable pattern of agriculture. In this context, an integrated study on the agroecological applications of OMW from the ultrafiltration (UF) - nanofiltration (NF) process was carried out. This process generated three fractions: UF retentate and NF permeate, depleted in salts and phenolic compounds, were studied for their fertilization and irrigation potential, while NF retentate, enriched in these elements, was studied for its potential as a bioherbicide. The phytotoxicity of the NF retentate fraction on two crops (maize and flax) was evaluated on seedlings growth and chloroplast pigments content. In addition, the induced defense responses in maize and flax seedlings were investigated by measuring two parameters: the activity of the detoxification enzyme glutathione-S-transferase (GST) and the concentration of polyphenols, as a component of the antioxidant defense strategy in plants. Biomass, height, and chloroplast pigments content decreased progressively with increasing NF retentate concentration. Conversely, an increase in GST activity and polyphenol concentration was observed. These results highlighted the ability of OMW to induce an oxidative stress on maize and flax seedlings, triggering a defense response through GST and phenolic compounds. On the other hand, in vitro tests on the phytotoxicity of the NF retentate fraction on the common weed Sinapis arvensis were carried out. No germination was observed even with the lowest dilution applied, thus establishing the first data about the selectivity of potential OMW-derived bioherbicides. On the other hand, UF retentate and NF permeate treatments led to a significant increase in maize growth: these fractions could then be considered as a promising organic fertilizer for degraded agricultural soils, as well as an alternative water source for crops irrigation.

Microbial Resistance to Carbapenems in Effluents from Gynaecological, Paediatric and Surgical Hospital Units.

The aim of this work is to identify and count antimicrobial resistance (AMR) in hospital effluents (HEs) of 2 units of the University Hospital Mohamed VI the Mother and Child Hospital (MCH) and the Ar-razi Surgical Hospital (ArzH), and to compare the two hospital units in terms of ARMs and seasonal variation. Each HE was sampled during 2016 and 2017. After identification of the pathogenic strains and determination of AMR, the results were reported for 24 ABs, including 3 carbapenems (CBP), and their consumption rates. The Predicted environmental concentration (PEC) rate of carbapenems in the HE of the study sites is calculated. A comparative analysis of the AMR of the isolated bacterial species was performed and related to the evolution of PEC in HEs. In the ArzH effluents:15 strains isolated, 7 are carbanepenem-resistant Enterobacteria (CRE) and are resistant to at least one of the 3 carbapenems tested. ArzH and MCH effluents respectively show some similarities: 26.87% and 28.57% of isolated bacteria are resistant to ertapenem while 43.48% and 57.14% are resistant to meropenem. However, for imipenem, the MCH effluent has a higher percentage of bacterial antibiotic resistance than ArzH. In addition, the percentage of resistance in each hospital unit effluent is mainly in relation with the increasing antibiotic consumption and predicted environmental values PEC for very antibiotic in each unit in the same period.

Removal of bacterial indicators in on-site two-stage multi-soil-layering plant under arid climate (Morocco): prediction of total coliform content using K-nearest neighbor algorithm.

This study aims to evaluate and monitor the efficacy of a full-scale two-stage multi-soil-layering (TS-MSL) plant in removing fecal contamination from domestic wastewater. The TS-MSL plant under investigation consisted of two units in series, one with a vertical flow regime (VF-MSL) and the other with a horizontal flow regime (HF-MSL). Furthermore, this study attempts to see whether linear model (LM) and K-nearest neighbor (KNN) model can be used to predict total coliform (TC) removal in the TS-MSL system. For 24 months, the TS-MSL system was monitored, with bimonthly measurements recorded at the inlet and outlet of each compartment. Obtained results show removal of 85% of COD, 67% of TP, 27% of TN, and 3 log units of coliforms with good system stability. Thus, the effluent meets the Moroccan water quality code for reuse in the irrigation of green spaces. In addition, as compared to LM, the KNN model (R2 = 0.988) may be considered as an effective method for predicting TC removal in the TS-MSL system. Finally, sensitivity analysis has shown that TC and dissolved oxygen level in the influent were the most influential parameters for predicting TC removal in the TS-MSL system.

Optimization of preparation conditions of a novel low-cost natural bio-sorbent from olive pomace and column adsorption processes on the removal of phenolic compounds from olive oil mill wastewater.

Olive oil mill wastewater (OMWW) poses an undeniable environmental problem due to its high organic loads and phenolic compound (PC) content. This study determined the optimal conditions for preparing a new bio-sorbent from olive pomace (OP) and the adsorptive treatment of OMWW by this bio-sorbent. The activation reaction was performed with hydrogen peroxide. The results of the combination effect optimization of the three preparation variables, the activation temperature (°C) X1, the activation time (min) X2, and the impregnation ratio X3, are presented by the response surface methodology (RSM). The maximum adsorption capacity was obtained at an activation time of 240 min, a temperature of 80 °C, and a ratio equal to 6.2:1. The bio-sorbent was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray diffractometer (XRD). The adsorption process performance of this bio-sorbent was examined in batch (phenol solution) and fixed-bed columns (real effluent of OMWW). An adsorption capacity of 789.28 mg g-1 and 643.92 mg g-1 has been achieved for 4000 mg L-1 concentration of PCs, respectively, for batch and fixed-bed column essays. The adsorption isotherm and kinetics were consistent with the Langmuir and pseudo-second-order models. Therefore, the Thomas model best fits the fixed-bed column experimental data. The bio-sorbent gave a high desorption percentage of PCs, which was above 60% using HCl (0.1M).

Electrosorption of phenolic compounds from olive mill wastewater: Mass transport consideration under a transient regime through an alginate-activated carbon fixed-bed electrode.

Olive mill wastewater (OMWW) is an environmentally critical effluent, specifically due to its high content of phenolic compounds (PCs), which are hazardous due to their antimicrobial activities in water. However, their properties have good health effects at suitable doses. For the first time, the electrosorption of PCs from actual OMWW has been proposed for their possible recovery as value-added compounds, while decontaminating OMWW. A bio-sourced alginate-activated carbon (AC) fixed-bed electrode was prepared based on the reuse of olive pomace solid waste as powdered AC. At the optimal AC content (1% w/v), the internal ohmic drop voltage was lower (2.26 V) and the mass transport coefficient was higher (9.7 10-5 m s-1) along with the diffusivity (7.3 10-9 m2 s-1), which led to enhanced electrosorption rates. Afterward, an optimal electrode potential was obtained (-1.1 V vs. Ag/AgCl), while higher voltages led to faradaic reactions. Moreover, the adsorption capacity was lower (123 mg g-1) than that of electrosorption (170 mg g-1) and was even higher (307 mg g-1) with actual effluents. This was probably due to the influence of electromigration, which was confirmed by new models that could predict the electrosorption kinetics well considering mass transport and acid dissociation constants.

A critical review on the electrosorption of organic compounds in aqueous effluent - Influencing factors and engineering considerations.

Despite being an old process from the end of the 19th century, electrosorption has attracted renewed attention in recent years because of its unique properties and advantages compared to other separation technologies and due to the concomitant development of new porous electrode materials. Electrosorption offer the advantage to separate the pollutants from wastewater with the possibility of selectively adsorbing and desorbing the targeted compounds. A comprehensive review of electrosorption is provided with particular attention given to the electrosorption of organic compounds, unlike existing capacitive deionization review papers that only focus on inorganic salts. The background and principle of electrosorption are first presented, while the influence of the main parameters (e.g., electrode materials, electrode potential, physico-chemistry of the electrolyte solutions, type of compounds, co-sorption effect, reactor design, etc.) is then detailed and the modeling and engineering aspects are discussed. Finally, the main output and future prospects about recovery studies and combination between electro-sorption/desorption and degradation processes are given. This review particularly highlights that carbon-based materials have been mostly employed (85% of studies) as porous electrode in organics electrosorption, while existing studies lack of electrode stability and durability tests in real conditions. These electrodes have been implemented in a fixed-bed reactor design most of the time (43% of studies) due to enhanced mass transport. Moreover, the electrode potential is a major criterion: it should be applied in the non-faradaic domain otherwise unwanted reactions can easily occur, especially the corrosion of carbon from 0.21 V/standard hydrogen electrode or the water oxidation/reduction. Furthermore, there is lack of studies performed with actual effluents and without addition of supporting electrolyte, which is crucial for testing the real efficiency of the process. The associated predictive model will be required by considering the matrix effect along with transport phenomena and physico-chemical characteristics of targeted organic compounds.

Behaviour of physicochemical and microbiological characteristics of vertical flow constructed wetland substrate after treating a mixture of urban and olive mill wastewaters.

The aim of the current work is to evaluate the effect of a mixture of olive mill wastewater (OMWW) and urban wastewater (UW) on constructed wetland (CW) substrate physicochemical parameters, and to study the abundance and behaviour of microbial community at different depths. In this regard, substrate samples were investigated at three depth levels (0-10 cm, 10-20 cm and 20-30 cm) inside a pilot scale CW treating the mixture. In order to compare the obtained results with the conventional case, a control (CW pilot plant treating only UW) was implemented. Result shows that an increase in electrical conductivity (from 0.134 to 0.222 mS/cm in 0-10 cm and from 0.131 to 0.283 mS/cm in 10-20 cm), total dissolved salts (from 65.45 to 108.67 mg/kg in 0-10cm and from 64.33 to 135.3 mg/kg in 10-20 cm), total organic carbon (from 0.86 to 6.84%), total nitrogen (from 0.1 mg/kg to 0.45, 0.43 and 0.41 mg/kg, in 0-10 cm, 10-20 cm and 20-30 cm respectively) and C/N ratio take place in the substrate after the treatment of the mixture. As for the microbiological parameters, treating the mixture in a CW results in an increase in the yeast and fungi which may optimize the biodegradation of compounds such as polyphenols that are non-easily degraded.

High-throughput 16S rRNA gene sequencing of the microbial community associated with palm oil mill effluents of two oil processing systems.

Palm Oil Mill Effluents (POME) are complex fermentative substrates which habour diverse native microbial contaminants. However, knowledge on the microbiota community shift caused by the anthropogenic effects of POME in the environment is up to date still to be extensively documented. In this study, the bacterial and archaeal communities of POME from two palm oil processing systems (artisanal and industrial) were investigated by Illumina MiSeq Platform. Despite the common characteristics of these wastewaters, we found that their microbial communities were significantly different with regard to their diversity and relative abundance of their different Amplicon Sequence Variants (ASV). Indeed, POME from industrial plants harboured as dominant phyla Firmicutes (46.24%), Bacteroidetes (34.19%), Proteobacteria (15.11%), with the particular presence of Spirochaetes, verrucomicrobia and Synergistetes, while those from artisanal production were colonized by Firmicutes (92.06%), Proteobacteria (4.21%) and Actinobacteria (2.09%). Furthermore, 43 AVSs of archaea were detected only in POME from industrial plants and assigned to Crenarchaeota, Diapherotrites, Euryarchaeota and Nanoarchaeaeota phyla, populated mainly by many methane-forming archaea. Definitively, the microbial community composition of POME from both type of processing was markedly different, showing that the history of these ecosystems and various processing conditions have a great impact on each microbial community structure and diversity. By improving knowledge about this microbiome, the results also provide insight into the potential microbial contaminants of soils and rivers receiving these wastewaters.

Performance and dynamic modeling of a continuously operated pomace olive packed bed for olive mill wastewater treatment and phenol recovery.

The solid waste of olive oil extraction processes (olive pomace, OP) was converted into activated carbon (AC) by treating it with NaOH and then encapsulating it within sodium alginate (SA) in beads by crosslinking (SA-AC beads). The prepared SA-AC beads were utilized as an adsorbent for the elimination and recovery of phenolic compounds (PCs) from olive mill wastewater (OMWW) following a zero liquid and waste discharge approach to implement and promote the circular economy concept. The novel AC and SA-AC beads were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR) and Brunauer, Emmett and Teller (BET) analysis. The adsorption performance of these beads was evaluated in batch and fixed-bed reactors operated in a concurrent flow system. The results revealed that an adsorption capacity of 68 mg g-1 was attained for 4000 mg L-1 phenolic compounds. The kinetics of the adsorption process of the PCs fit a pseudo second-order model, and the most likely mechanism took place in two stages. The adsorption isotherm conformed to the Langmuir model, representing the monolayer adsorption of the phenolic compounds. The dynamic models were used, and they accurately represented the breakthrough curves. Considering PC recovery and process reusability, a regeneration experiment of SA-AC beads was carried out in fixed-bed reactors. SA-AC beads showed a high percentage desorption >40% using ethanol and were efficient after several cycles of OMWW treatment and phenol recovery.

Productivity and nutritional and nutraceutical value of strawberry fruits (Fragaria x ananassa Duch.) cultivated under irrigation with treated wastewaters.

BACKGROUND: Agriculture represents a productive sector typically characterized by a high water demand, whereas freshwater (FW) availability is a problem of increasing concern in the world and FW resources are becoming insufficient for sustaining agricultural irrigation. The reuse of treated wastewaters (TWWs) for crop irrigation could be an efficient tool for reducing water shortage. Hence, the present study evaluated the food quality of Fragaria x ananassa (cultivar Camarosa) fruits irrigated with four types of treated wastewaters (TWWs). Strawberries were analysed for yield, sucrose, fructose, glucose, total soluble polyphenols (TSP), total monomeric anthocyanins (TMA), and antiradical and antioxidant capacity. In addition, a targeted quantification of the most representative phenolic compounds of strawberry was performed. RESULTS: TWWs complied the Italian ministerial decree 185/2003 for wastewater reuse, with very few exceptions, mainly represented by chloride concentrations (258-643 mg L-1 versus a legal threshold of 250 mg L-1 ). The reuse of TWWs reduced fruit yield (10-26%) compared to irrigation with tap water as a control. Irrigation with TWWs gave also rise to the decrease of total sugars (14-26%), TSP (2-10%) and TMA (29-49%). Individual phenolic acids, flavonols and flavanols were quite stable in response to the irrigation with TWWs, whereas anthocyanidins decreased significantly. CONCLUSION: Although TWWs negatively affected fruit quality, the nutritional and nutraceutical parameters determined in the present study were in line with data previously reported for strawberries purchased in the market or cultivated in research orchards, thus suggesting that the use of TWWs does not prevent the fruit marketability. © 2020 Society of Chemical Industry.

Potential of medium chain fatty acids production from municipal solid waste leachate: Effect of age and external electron donors.

A large quantity of leachate is generated during municipal solid waste collection operation and in landfills due to the large amount of organic waste and high humidity. The content of medium chain fatty acids (MCFAs) in the leachate is a low cost feedstock for bio-based chemical and fuel production processes. The aim of this study is to investigate the MCFA production potential of three leachate ages through chain elongation process under uncontrolled pH batch test. Moreover, the effect of using different external electron donors (ethanol, methanol and a mixture of both) is studied. The experiment consists of characterizing the samples then adding external electron donors with a specific ratio to leachate samples under mesophilic temperature. For this investigation, also a statistical analysis is done, which shows the production of MCFAs is highly influenced by leachate age. The results indicate that the production of even-numbered acids increase from 600 to 1,000 mg/L by the end of the ethanol chain elongation experiment for young leachate. However, a higher MCFA production of more than 1,000 mg/L is achieved by using the mixture of methanol and ethanol as electron donor. Furthermore, all methanol chain elongation experiments lead to an odd-numbered production of MCFAs, such as pentanoic and heptanoic acids. These results confirm the potential improvement of MCFA production from leachate through choosing the optimal leachate age and electron donor. Overall, producing MCFAs from leachate is a good example of circular bio-economy because waste is used to produce biochemicals, which closes the material cycle.

Neural network and cubist algorithms to predict fecal coliform content in treated wastewater by multi-soil-layering system for potential reuse.

This study aims to find the most accurate machine learning algorithms as compared to linear regression for prediction of fecal coliform (FC) concentration in the effluent of a multi-soil-layering (MSL) system and to identify the input variables affecting FC removal from domestic wastewater. The effluent quality of two different designs of the MSL system was evaluated and compared for several parameters for potential reuse in agriculture. The first system consisted of a single-stage MSL (MSL-SS), and the second system consisted of a two-stage MSL (MSL-TS). The concentration of FC in the effluent of the MSL-TS system was estimated by three machine learning algorithms: artificial neural network (ANN), Cubist, and multiple linear regression (MLR). The accuracy of the models was measured by comparing the real and predicted values. Significant (p < .001) improvements were noted for the removal of pollutants by the MSL-TS system compared with the MSL-SS system. Overall, the water quality parameters investigated complied with FAO irrigation standards. The predictive performance of the models has been compared and evaluated using several metrics. The results revealed that the ANN model yielded a superior predictive performance (R2  = .953), followed by the Cubist model (R2  = .946) and the MLR technique (R2  = .481). Based on the accurate model (ANN), the degree of influence of each predictor was investigated, and the results show that total suspended solids and pH have proved to be more useful for predicting FC concentrations.